Professional slip ring manufacturer

Jarch Inc.-mall

Global Hotline

Info@szjarch.cn +86137-1425-1726
JSR-MPV08 Multi-channel Pneumatic Slip Ring
JSR-MPV08 Multi-channel Pneumatic Slip Ring
JSR-MPV08 Multi-channel Pneumatic Slip Ring
JSR-MPV08 Multi-channel Pneumatic Slip Ring
video

JSR-MPV08 Multi-channel Pneumatic Slip Ring

Product introduction: JSR-MPV08 series Multi-channel Pneumatic Slip Ring(gas-electric slip ring) of JARCH is a 8-in 8-out gas-electric slip ring. It adopts a rotary scheme of air outlets from the side inlet and end face, which can rotate 360 degrees to transmit compressed air, steam, vacuum, and other gaseous media. Support air pipes of 4mm, 6mm, 8mm, 12mm, 16mm, and other specifications, and the air ports are available in M5, 1/8, 1/4, 3/8, 1/2, and other specifications. JSR-MPV08 series gas-electric slip ring can not only transmit gas, but also can mix and transmit various currents from 2A to 800A; it can mix power line, signal line, Ethernet, industrial bus, control line, solenoid valve, induction line, etc.; Solve the winding phenomenon existing in the rotation of various equipment, and ensure the stable transmission of mixed transmission media under the condition of uninterrupted rotation.

Passages(Gas): 8 Passages Port Size: M5-G1 Port/Optional Pipe Size:4-14mm Optional Passages(Gas+Electric ):1-128 Passages

download:

instructions 3D model

Model Ordering Instructions

型号定购说明

JSR-MPV0801-2P10-4S-TY.jpg

Technical Specifications

技术规格参数

Technical Specifications

Rotary Joint Technical Parameters

Spec.

Data

Spec.

Data

Passages(Gas)

8-in,8-out

Pipe Size

Can be customized according to demand

Port Size

M5、G1/8''、G1/4''、G3/8''、G1/2'' Optional

           Max. Operating Pressure

Positive Pressure 1Mpa(can be customized high pressure) , Vacuum - 0.01torr

Electrical Technical Parameters

Power

Signal

Spec.

Data

Spec.

Data

Voltage range

0-440VAC/VDC

Voltage range

0-440VAC/VDC

Insulation Resistance

≥1000MΩ/500VDC

Insulation Resistance

≥1000MΩ/500VDC

Lead wire spec.

AWG16# Tinned Teflon

Lead wire spec.

AWG22# Tinned Teflon

Rated current

Optional current for each channel

Electrical noise

10mΩ@6VDC,50mA,5Rpm

Dynamic resistance change

<0.01Ω

Mechanical Data

Mechanical Performance

Environmental Performance

Spec.

Data

Spec.

Data

Working Life

> 50 million for ref(depends on working conditions)

Operating Temperature

-30C°-80C°

Rated Speed

300MRP(can be customized )

Working Humidity

0-85%RH

Contact Material

Precious Metal (can be customized )

Mechanical Vibration

MIL-SID-810E

Shell Material

Aluminum Alloy (surface hard oxidation treatment)

IP Grade

IP51( IP65、IP68 Optional)

Rotational Torque

0.1N.M;+0.03N.M/ channel

 

DRAWING

标准图纸

*If no standard models are suitable, contact us for custom solutions directly,thanks.图片

JSR-MPV0800-24S

图片

JSR-MPV0801-12S

Standard Model List

常规产品选型表

Conventional product selection table

JSR-MPV08XX Multi-channel Pneumatic Slip Ring Table

Model

Passages(Gas)

Port Size

Pipe Size

Power  Circuits(10A)

Signal Circuits(5A)

MPV08XX-6P10

8

M5、G1/8"、G1/4"、G3/8"、G1/2" Optional

4MM、6MM、8MM、10MM、12MM、14MM Optional

6

0

MPV08XX-6S

8

M5、G1/8"、G1/4"、G3/8"、G1/2" Optional

4MM、6MM、8MM、10MM、12MM、14MM Optional

0

6

MPV08XX-12P10

8

M5、G1/8"、G1/4"、G3/8"、G1/2" Optional

4MM、6MM、8MM、10MM、12MM、14MM Optional

12

0

MPV08XX-6P10-6S

8

M5、G1/8"、G1/4"、G3/8"、G1/2" Optional

4MM、6MM、8MM、10MM、12MM、14MM Optional

6

6

MPV08XX-12S

8

M5、G1/8"、G1/4"、G3/8"、G1/2" Optional

4MM、6MM、8MM、10MM、12MM、14MM Optional

0

12

MPV08XX-18P10

8

M5、G1/8"、G1/4"、G3/8"、G1/2" Optional

4MM、6MM、8MM、10MM、12MM、14MM Optional

18

0

MPV08XX-6P10-12S

8

M5、G1/8"、G1/4"、G3/8"、G1/2" Optional

4MM、6MM、8MM、10MM、12MM、14MM Optional

6

12

MPV08XX-12P10-6S

8

M5、G1/8"、G1/4"、G3/8"、G1/2" Optional

4MM、6MM、8MM、10MM、12MM、14MM Optional

12

6

MPV08XX-18S

8

M5、G1/8"、G1/4"、G3/8"、G1/2" Optional

4MM、6MM、8MM、10MM、12MM、14MM Optional

0

18

MPV08XX-S24

8

M5、G1/8"、G1/4"、G3/8"、G1/2" Optional

4MM、6MM、8MM、10MM、12MM、14MM Optional

0

24

MPV08XX-6P10-18S

8

M5、G1/8"、G1/4"、G3/8"、G1/2" Optional

4MM、6MM、8MM、10MM、12MM、14MM Optional

6

18

MPV08XX-30S

8

M5、G1/8"、G1/4"、G3/8"、G1/2" Optional

4MM、6MM、8MM、10MM、12MM、14MM Optional

0

30

MPV08XX-36S

8

M5、G1/8"、G1/4"、G3/8"、G1/2" Optional

4MM、6MM、8MM、10MM、12MM、14MM Optional

0

36

Note: N pieces of  5A current loops can be used as 1 channel of N*5A current loop;  For example: 2 rings 5A can be used as 1 circuit 10A.*If no standard models are suitable, contact us for custom solutions directly,thanks.

Color code of Lead Wire

各环路导线色码表

Ring No.ColorRing No.Color
1Black7Purple
2Red8Grey
3Yellow9Orange
4Green10Brown
5Blue11transparent
6White
12Light Green
(Note: 12 colors are a group, with serial numbers 1...12, the next group repeats the first 12 colors, and each group is identified by a number tube as the group serial number.)

OPTIONAL

可选项

Note: The following special requirements can be customized, the delivery time will increase by 3~15 days, and the cost will increase by 5%~50%. Most of the basic accessories of our company are standardized and modularized, and non-standard customization can also greatly reduce price and delivery.

  1. The outgoing method and outgoing length of the rotor and stator can be customized.

  2. Due to structural limitations, it can be customized according to the specified length or height, or outer diameter.

  3. It can support up to 200 channels of power current or signal.

  4. Optional aviation plug, terminal, and heat shrink tube.

  5. Yaskawa, Panasonic, Siemens, and other servo system signal, power line, and encoder line hybrid slip ring.

  6. Can mix high-speed data transmission (including Ethernet, USB, Profibus, ProfiNET, EtherCAT, CANopen, CANBUS, CC-LINK, RS232, RS485, and other industrial buses).

  7. The temperature control signal and thermocouple signal are mixed.

  8. Customized slip ring for special environments such as shockproof and high temperature.

  9. It can be mixed with pneumatic and hydraulic rotary joints to form a gas-electric-hydraulic slip ring.

  10. The low/high frequency and connector types can be customized.

  11. The High-frequency power can be customized.

  12. The number of channels can be customized according to requirements.

  13. The maximum current can reach 5000 amperes (A).

  14. Military level.

  15. Waterproof, underwater mode optional, IP65, IP68 optional.

  16. Requirements for stainless steel housing.



Applied Projects

适用项目

Non-standard automation equipment

The definition of non-standard automation equipment is user-customized, user-only, non-market-circulated automation system integration equipment, which is assembled by unit equipment manufactured in accordance with the unified industry standards and specifications recognized by the state and is based on the needs of customers. Develop, design, and manufacture equipment. At present, most of the equipment is inseparable from the requirements of gas and electricity, so the Multi-channels Pneumatic Slip Ring was born in response to the needs of the industry. The Multi-channels Pneumatic Slip Ring can ensure that the equipment rotates 360 degrees while transmitting all media such as air/gas, current, and signal, and all core components. The gas-electric slip rings produced by JARCH Electromechanical are widely used in non-standard automation equipment and have been recognized by many equipment manufacturers and customers.非标自动化设备

Gas-electric rotary platform(Pneumatic rotary platform)

The gas-electric rotating platform is used by many automation equipments, which greatly reduces the size of the equipment and reduces the cost of the equipment. The reason why the gas-electric rotary table can perform various actions while continuously rotating is because of the support of gas-electric slip rings, which can ensure that the equipment can transmit various control signals and workbenches while rotating uninterruptedly. Air pressure is required for rotation. JARCH Electromechanical has specialized in R&D and production of gas-electric slip rings for 16 years. The gas-electric slip rings produced by the company are widely sold in more than 100 countries overseas and have been recognized by many new and old customers, JARCH Electromechanical welcomes new and old customers to visit the factory for guidance.


旋转工作台


Automated production line

An automated production line refers to a form of production organization in which the production process is realized by an automated machine system. It is formed on the basis of the further development of the continuous assembly line. The modern automated production line is the pinnacle of human beings entering the era of gas and electricity. The development of automated production lines has also promoted the development of the conductive slip ring industry. In response to the needs of equipment, a series of hybrid slip rings such as gas-electric slip rings, electro-hydraulic slip rings, and electro-optic slip rings have emerged, especially gas-electric slip rings. It has become an indispensable part of the automated production line. The gas-electric slip ring can solve the winding problem caused by the rotating work of the equipment, greatly improve the work efficiency of the production line, and avoid the possibility that the production line will be stopped due to the winding of the equipment.


自动化产线


Message consultation

Product

JSR-MPV08 Multi-channel Pneumatic Slip Ring

name
tel
email

Message prompts

Close