Professional slip ring manufacturer

Provide slip ring solutions for customers all over
Jarch Inc.-mall

Global Hotline

Info@szjarch.cn +86137-1425-1726

JARCH durable slip ring center

JARCH slip ring, durable pronoun, warranty for 2 years

Non-standard custom electrical slip ring

Description change: JARCH Electromechanical has experienced slip ring engineers, which are specially tailored according to customer requirements to meet customers' needs for greater current, more signals, more voltage, higher speed, and more media for slip rings.

Rotary joint series

Rotary joint is a kind of equipment for the transmission of compressed air, cooling water, hydraulic oil, heat transfer oil and other fluid media in relatively rotating pipelines. According to the transmission medium, it is divided into gas rotary joint and hydraulic rotary joint, also known as pneumatic slip ring and hydraulic slip ring.

Conductive slip ring series

The conductive slip ring is not specially used for high-power equipment. The description here is a bit problematic.---The conductive slip ring is an electrical component that specifically solves the problem of wire winding of power current, signal and communication when rotating 360°. It is an electrical connection device that realizes the power supply, data and signal

Gas electrical slip ring series

The electric pneumatic slip ring is also called the electric pneumatic hybrid slip ring. It is a slip ring that solves the over-electricity, gas or vacuum and other media together with the electric slip-ring mixed gas rotary joint. It can realize the simultaneous passing of power current, control signal, communication, etc. The circuit is communicated with compressed air, vacuum or other medium by 360° rotation.

JSR-PSB012 Series Pancake Slip Ring

Product description: JSR-PSB012 series disc conductive slip ring is the type without rotor head, the diameter of central hole is 12mm, suitable for installation on the central shaft less than or equal to 12mm, slip ring can pass signal or power supply, the number of routes can be 1-24. The height of slip ring can be from 10mm to 50mm minimum, all aluminum alloy structure, the contact material is precious metal + super hard gold plating treatment, stable operation, small resistance fluctuation. It is mainly used in the special space requirements of limited height space and basically unrestricted transverse space. The outlet mode adopts stator side outlet and rotor side outlet.

details

Non standard customization

It is customized according to customers' requirements, and is mainly used for military equipment, medical equipment or large mechanical equipment. Our company has strong R&D strength, advanced production equipment and high-tech processing technology, and has long-term and extensive cooperation with domestic famous scientific research institutes.

details

Rotary joint

JSR-ML0204-FU20 rotary joint is designed and customized for a robot company. This type of rotary joint can transmit multiple gases at the same time. It can transmit multiple gases at the same time of 360 ° rotation, so that the robot can rotate for a long time, and will not stop production due to the winding of the rotary joint. Jiachi Electromechanical Co., Ltd. specializes in R&D and customized production of various conductive slip rings and rotary joints. The company has 10000+mature schemes for customers to choose at will. More than a dozen technologies provide technical services 24 hours for free, 8 hours for drawing, 7 days for proofing, and the national express package is delivered to the door. Jiachi Electromechanical Co., Ltd. is located in Songgang, Shenzhen. Welcome new and old customers to the factory for reference and guidance.

details

JSR-A8H Mercury Slip Ring

JSR-A8H is a class 8 mercury conductive slip ring. This mercury slip ring can transmit six 30A currents and two 4A control currents at the same time. It uses liquid mercury as the contact material. The mercury slip ring, also known as the mercury rotary joint, is a conductive rotary adapter with liquid mercury as the conductive medium. It is a slip ring widely used. Mercury slip ring is developed and produced by using special sealing materials, insulation and conductive technology. Its shell is made of aluminum alloy or stainless steel, and is used for any rotating signal, such as: small voltage, current, emf, thermocouple, stringauge, audio and video signal, high frequency, computer signal and electrical connection.

details

Shenzhen JARCH electrical megawatt class wind turbine power slip ring

The megawatt variable blade wind turbine slip ring developed by Jiachi Mechanical and Electrical is specially developed and designed for all kinds of wind turbines. It is specially developed and produced for the purpose of adapting to China's wind power system, with ultra-high reliability. The key main material of the slip ring is imported material, and the advanced equipment is used in the internal design to monitor the whole generator with the wind power system. The megawatt wind power slip ring developed and produced by Jiachi Mechanical & Electrical has good low temperature resistance, high humidity resistance, sand resistance, corrosion resistance, impact resistance, shock resistance, stable performance without maintenance and other characteristics, the service life can be up to 20 years or hundreds of millions of turns.

details

JSR-PSA012 Series Pancake Slip Ring

Product description: JSR-PS012 series disc conductive slip ring center hole diameter 12.7mm, suitable for installation on the central shaft less than or equal to 12.7mm, slip ring can pass signal or power supply, the number of routes can be 1-24. The height of slip ring can be from 10mm to 50mm minimum, all aluminum alloy structure, the contact material is precious metal + super hard gold plating treatment, stable operation, small resistance fluctuation. It is mainly used in the special space requirements of limited height space and basically unrestricted transverse space. Outlet mode adopts side inlet and side outlet mode.

details

JSR-TH100 Series Through Hole Slip Rings

JSR-TH100 series through hole slip ring, perforated diameter 100mm(applicable to OD 185mm, number of channels: 1-108, aluminum alloy structure of the whole precision conductive slip ring. Support Signal (2A) or, or 10A, 15A, 30A supply current, voltage 380VAC/24VDC, the working voltage can be customized up to 1000V; The protection level can be customized to IP65/IP68.

details

JSR-BC025 High Current Slip Ring

The JSR-BC025 series is a hollow high current slip ring with an inner hole of 25mm. The hollow can be installed with a shaft or through a gas-liquid conduit. The rated current ranges from 20A, 30A, 50A to more than 1000A, with high rotation accuracy, more stable performance and longer life. The contact material is treated with precious metal + super-hard gold plating, with small torque, stable operation, long life, small resistance fluctuation, and small contact resistance, ensuring stable transmission performance. It is widely used in a series of high-current automatic slip ring equipment such as electroplating equipment and welding equipment.

details

JSR-WR030 Series Waterproof Slip Rings

JSR-WR030 series waterproof conductive slip ring, Through hole inner diameter: 30mm (applicable 1-48 channels slip ring), and the integral precision conductive slip ring with all aluminum alloy structure. It supports signal, communication, or 10A~30A power supply current, with a voltage of 380VAC / 24VDC. It is specially designed for underwater operation and waterproof operation. It is an industrial-grade product, through-hole installation, waterproof IP68, gold-gold contact, imported sealing and military-grade electroplating treatment, multi-point contact-contact, waterproof gland for outgoing line, cable, etc. can be customized according to requirements.

details

JSR-RAH012 Series Through Bore Multi Channel Pneumatic Slip Ring

Series via gas-electric slip ring is an inner hole of 12 mm swivel gas-electric wear shaft installation is adopted, this gas power slip ring support compressed air, vacuum, hydrogen, nitrogen, chemical mixed gas, steam and other transmission of gas medium, as well as transmission of 0-1000 - a variety of specifications of the current transmission, more can transmit at the same time, network, industrial bus, Hd signal line and other control signal transmission. This SERIES OF slip RINGS are WIDELY USED in industrial machine centers, rotary tables, heavy equipment towers, cable reels, packaging equipment, magnetic clutches, process control equipment, rotary sensors, emergency lighting equipment, robotics, exhibition/display equipment

details

JSR-MPS02 Multi-channel Pneumatic Slip Ring

Product introduction: JSR-MPS02 series Multi-channel Pneumatic Slip Ring(gas-electric slip ring) of JARCH is a 2-in 2-out gas-electric slip ring. It adopts a rotary scheme of air outlets from the side inlet and end face, which can rotate 360 degrees to transmit compressed air, steam, vacuum, and other gaseous media. Support air pipes of 4mm, 6mm, 8mm, 12mm, 16mm, and other specifications, and the air ports are available in M5, 1/8, 1/4, 3/8, 1/2, and other specifications. JSR-MPS04 series gas-electric slip ring can not only transmit gas, but also can mix and transmit various currents from 2A to 800A; it can mix power line, signal line, Ethernet, industrial bus, control line, solenoid valve, induction line, etc.; Solve the winding phenomenon existing in the rotation of various equipment, and ensure the stable transmission of mixed transmission media under the condition of uninterrupted rotation.

details

JSR-FE012B-1SFSeries Electric Optic Slip ring

Photoelectric slip ring is composed of conductive slip ring which can transmit power supply, control signal power supply, instrument and computer automatic control of micro electric signal and smooth ring which can transmit multi-mode single-mode optical fiber signal. It can solve the transmission problem of 360° rotating optical signal and electrical signal at the same time. Suitable for use in the need of unlimited, continuous or intermittent rotation, but also need to transfer large capacity data, signal from the fixed position to the rotating position, can improve mechanical properties, simplify system operation, avoid the rotation of the active joint damage to the fiber. It can be used together with traditional electronic manifold ring to make photoelectric hybrid manifold ring to transmit power and high speed data. Can be customized to meet the needs of various solutions.

details

JSR-MFO20 Series Multi Channel Fiber Optic Slip Ring

JSR-MFO20series fiber slip ring, 2-10 optical fiber channel optional (support single mode/multi-mode) in 360 degree unlimited rotation when lossless transmission data. The entire product is very compact, specifically for the space size requirements, especially suitable for application in need unrestricted, continuous or intermittent rotation, and also need to send the large capacity data from a fixed position to the rotational position, signal, can improve mechanical properties, simplifying the system operation, avoid activities due to the rotation of the joints on the damage of the fiber.

details

JSR-SFO06 Series Single Mode Fiber Optic Slip Ring

JARCH Electromechanical JSR-FO006 series single channel optical fiber slip ring, one channel optical fiber (supporting single-mode/multi-mode) transmits data losslessly when 360 ° unrestricted rotation is performed. The whole product is very compact and specially designed for applications requiring space size. It is especially suitable for applications where unlimited, continuous or intermittent rotation is required, and large capacity data and signals are required to be transmitted from fixed position to rotary position. It can improve mechanical performance, simplify system operation, and avoid damage to outgoing optical fibers due to rotation of movable joints.

details

HE012 Series Ethernet Slip Ring

JSR-HE012 series Ethernet slip ring, the inner hole is 25mm, the outer diameter is the standard 78mm compact integrated structure of 2 channels 100m/1000M Ethernet integrated precision conductive slip ring, can mixed transmission power, current, signal, etc. It has the advantages of stable transmission, no packet loss, no string code, small back loss, small insertion loss, etc. American military coating technology, precious metal + super hard gold plating treatment, ultra-low BER and ultra-high signal-to-noise ratio.

details

JSR-DSM002 Series Miniature PCB Slip Ring

The DSM002 series miniature conductive slip ring developed by Shenzhen JARCH Electromechanical Institute is a miniature ultra-thin PCB disc conductive slip ring with an inner diameter of 2mm and a thickness of up to 3mm. This series of slip rings can transmit multi-channel current and control signals at the same time. The product is simple to install and easy to maintain. Compared with Jiachi mechanical and electrical conventional slip ring, its main characteristics are very thin thickness, large diameter. The contact is made of precious metal, with high stability, low torque, low loss and maintenance free, low electrical noise, long life and other characteristics, widely used in medical CT, rotating booth, LDE rotating billboard and other occasions with small installation space!

details

JSR-DS012 Series Pcb Pancake Slip Ring

Shenzhen JARCH DS series PCB slide ring is specially developed for the installation of equipment with limited height and sufficient lateral space, ultrathin conductive slide ring, thickness of 6mm, the thintest is up to 5mm. Compared with Jiachi mechanical and electrical conventional slip ring, its main characteristics are very thin thickness, large diameter. The contact is made of precious metal, with high stability, low torque, low loss and maintenance free, low electrical noise, long life and other characteristics, widely used in medical CT, rotating booth, LDE rotating billboard and other occasions with small installation space!

details

JSR-PSA012 Series Pancake Slip Ring

Product description: JSR-PS012 series disc conductive slip ring center hole diameter 12.7mm, suitable for installation on the central shaft less than or equal to 12.7mm, slip ring can pass signal or power supply, the number of routes can be 1-24. The height of slip ring can be from 10mm to 50mm minimum, all aluminum alloy structure, the contact material is precious metal + super hard gold plating treatment, stable operation, small resistance fluctuation. It is mainly used in the special space requirements of limited height space and basically unrestricted transverse space. Outlet mode adopts side inlet and side outlet mode.

details

JSR-HCS022 series HD slip ring

The outer diameter of JSR-HCS022 series cap type slip ring is 22 mm, small in size and compact in structure. It is a product specially developed by Jiachi Electromechanical Electronics for non civilian fields such as national defense, military and research institutes. It adopts super thick gold plating treatment, imported bearings and rare metal alloy wire brushes. The rotating end conductor and the static end conductor use 24 color conductors correspondingly, which is more convenient for wiring operation. The conductive slip ring is designed with a 90 degree angle V slot, which allows more contact surfaces, smoother rotation, lower torque and lower dynamic resistance.

details

JSR-MCS006 Series Miniature Capsule Slip Rings

JARCH MCS006 series super cap slip ring, slip ring diameter 6.5 mm, optional 1~12 channels. Its small structure design can meet the needs of space size, strong stability, easy installation, without flange, both ends can be connected directly, the slip ring contact point is made of gold-gold material, to ensure very low resistance fluctuation and long working life; It is used in precision instruments, electronic gimbal stabilizers, UAVs and other devices requiring 360° stable continuous or intermittent rotation.

details

JSR-CS017 Series Capsule Slip Rings

The outer diameter of the JSR-CS017 series cap type slip ring is 17mm, small in size and compact in structure. It is specially developed by JARCH Electromechanical for national defense, military, research, and other non-civil fields. It adopts ultra-thick gold-plated treatment, imported bearings, and rare metal alloy brush wire. The rotating end of the wire and the static end of the wire corresponding to the use of 24-color wire, more convenient for wiring operation. Conductive slip ring adopts a 90-degree Angle V groove design, so that more contact surface so that the rotation is more smooth, torque is lower and dynamic resistance is lower.

details

JSR-RAH012 Hollow Multi-channel Pneumatic Slip Ring

JSR-RAH012 series Hollow Multi-channel Pneumatic Slip Ring is an inner hole diameter 12mm slip ring, shaft installation adopted, this hybrid slip ring support compressed air, vacuum, hydrogen, nitrogen, chemical mixed gas, steam, and other transmissions of the gas medium, as well as transmission of 0~1000A variety of specifications of the current communication, more can transmit at the same time, the network, Industrial bus, HD signal line, and other control signal transmission. This series of slip rings are widely used in industrial machine centers, rotary tables, heavy equipment towers, cable reels, packaging equipment, magnetic clutches, process control equipment, rotary sensors, emergency lighting equipment, robotics, and exhibition/display equipment.

details

JSR-MFV02 Multi-channel Electro-Hydraulic Slip Ring

Product introduction: JSR-MFV02 series Multi-channel Electro-Hydraulic Slip Ring(fluid,gas-electric slip ring) of JARCH is a 3-in 3-out oil,gas-electric slip ring. It adopts a rotary scheme of air outlets from the side inlet and end face, which can rotate 360 degrees to transmit compressed air, steam, vacuum, and other gaseous media. Support air pipes of 4mm, 6mm, 8mm, 12mm, 16mm, and other specifications, and the air ports are available in M5, 1/8, 1/4, 3/8, 1/2, and other specifications. JSR-MFV02 series fluid-electric slip ring can not only transmit gas, but also can mix and transmit various currents from 2A to 800A; it can mix power line, signal line, Ethernet, industrial bus, control line, solenoid valve, induction line, etc.; Solve the winding phenomenon existing in the rotation of various equipment, and ensure the stable transmission of mixed transmission media under the condition of uninterrupted rotation.

details

JSR-MFS02 Multi-channel Electro-Hydraulic Slip Ring

Product introduction: JSR-MFS02 series Multi-channel Electro-Hydraulic Slip Ring(oil,fluid-electric slip ring) of JARCH is a 2-in 2-out oil,gas-electric slip ring. It adopts a rotary scheme of air outlets from the side inlet and end face, which can rotate 360 degrees to transmit compressed air, steam, vacuum, and other gaseous media. Support air pipes of 4mm, 6mm, 8mm, 12mm, 16mm, and other specifications, and the air ports are available in M5, 1/8, 1/4, 3/8, 1/2, and other specifications. JSR-MFS02 series fluid-electric slip ring can not only transmit gas, but also can mix and transmit various currents from 2A to 800A; it can mix power line, signal line, Ethernet, industrial bus, control line, solenoid valve, induction line, etc.; Solve the winding phenomenon existing in the rotation of various equipment, and ensure the stable transmission of mixed transmission media under the condition of uninterrupted rotation.

details

JSR-MPV02 Multi-channel Pneumatic Slip Ring

Product introduction: JSR-MPV02 series Multi-channel Pneumatic Slip Ring(gas-electric slip ring) of JARCH is a 3-in 3-out gas-electric slip ring. It adopts a rotary scheme of air outlets from the side inlet and end face, which can rotate 360 degrees to transmit compressed air, steam, vacuum, and other gaseous media. Support air pipes of 4mm, 6mm, 8mm, 12mm, 16mm, and other specifications, and the air ports are available in M5, 1/8, 1/4, 3/8, 1/2, and other specifications. JSR-MPV03 series gas-electric slip ring can not only transmit gas, but also can mix and transmit various currents from 2A to 800A; it can mix power line, signal line, Ethernet, industrial bus, control line, solenoid valve, induction line, etc.; Solve the winding phenomenon existing in the rotation of various equipment, and ensure the stable transmission of mixed transmission media under the condition of uninterrupted rotation.

details

JSR-MPS02 Multi-channel Pneumatic Slip Ring

Product introduction: JSR-MPS02 series Multi-channel Pneumatic Slip Ring(gas-electric slip ring) of JARCH is a 2-in 2-out gas-electric slip ring. It adopts a rotary scheme of air outlets from the side inlet and end face, which can rotate 360 degrees to transmit compressed air, steam, vacuum, and other gaseous media. Support air pipes of 4mm, 6mm, 8mm, 12mm, 16mm, and other specifications, and the air ports are available in M5, 1/8, 1/4, 3/8, 1/2, and other specifications. JSR-MPS04 series gas-electric slip ring can not only transmit gas, but also can mix and transmit various currents from 2A to 800A; it can mix power line, signal line, Ethernet, industrial bus, control line, solenoid valve, induction line, etc.; Solve the winding phenomenon existing in the rotation of various equipment, and ensure the stable transmission of mixed transmission media under the condition of uninterrupted rotation.

details

JSR-HY006 Series Single-channel Pneumatic Slip Ring

Product Introduction: JSR-HY006-2P10-4S-1G04-0102 gas electric slip ring of JARCH, supports an 8mm air pipe, which can not only transmit gas, but also transmit various currents of 2A ~ 800A; It can mix power line, signal line, Ethernet, industrial bus, control line, solenoid valve, induction line, etc; Flange installation, and hollow shaft installation can be customized; The media include: compressed air, hydrogen, nitrogen, chemical mixed gas, steam, cooling water, hot water, hot oil, petroleum, sulfuric acid, beverages, etc. JSR-HY010-1G08 gas electric slip ring is small volume, lightweight, and has small torque.JARCH Pneumatic & Electric rotary union slip ring is specially designed for industrial automation equipment applications, which can prevent tube winding problems well, and provide 1~24 pneumatic passages and 1~200 wires power or signals.

details

JSR-HF02-SMA-03-06 High Frequency Rotary Joint

JSR-HF02-SMA-03-06 is a Dual channel high-frequency slip ring. It can support 2 channels of high frequency (3GHz +6GHz) transmission under 360 ° rotation and can be used in high and low temperatures (- 55 ℃ ~ + 100 ℃). The two ends of the slip ring are connected with SMA type connectors, with stable signal transmission, ultra-low attenuation, and long service life. This product has been successfully applied to traditional artificial intelligence traffic control, missile defense radar technology, medical engineering, V-sat and satellite communication technology, TV camera system, or cable drum with sensitive cable wounds.

details

JSR-HS012 Series High Speed Slip Ring

JARCH's Slip Ring JSR-HS012 Series High-Speed Slip Ring type is compact in structure, light in weight, and high in protection grade, Max. speed in 12000RPM, through bore type,ID=12mm. It adopts high-temperature alloy and composite materials used in aero-engine to ensure that the slip ring can rotate at high speed for a long time without cooling. It is mainly used for conducting and transmitting data and control signals in laboratories and various detection devices that need high-speed rotating transmission signals.

details

JSR-WR030 Series Waterproof Slip Rings

JSR-WR030 series waterproof conductive slip ring, Through hole inner diameter: 30mm (applicable 1-48 channels slip ring), and the integral precision conductive slip ring with all aluminum alloy structure. It supports signal, communication, or 10A~30A power supply current, with a voltage of 380VAC / 24VDC. It is specially designed for underwater operation and waterproof operation. It is an industrial-grade product, through-hole installation, waterproof IP68, gold-gold contact, imported sealing and military-grade electroplating treatment, multi-point contact-contact, waterproof gland for outgoing line, cable, etc. can be customized according to requirements.

details

JSR-EP038F Series Explosion-proof Slip Rings

JSR-EP038F series explosion-proof slip ring is an explosion-proof conductive slip ring with an outer diameter of 100mm and flange installation. The whole body of this series of explosion-proof slip rings is made of stainless steel, and the latest explosion-proof means are used inside. The wires and joints are made of high-standard explosion-proof materials. It is an explosion-proof conductive slip ring with high safety and reliability. It is suitable for working in explosive environments, such as oil platforms Explosive material packaging equipment, spinning workshop equipment, agricultural product processing equipment, coal mines, spraying, and other dangerous places. At the same time, it can meet the explosive gas environment and explosive dust environment. The explosion-proof grade can be customized according to the needs of customers.

details

JSR-SM050F Servo Motor Encoder Slip Ring

JSR-SM050F encoder slip ring is specially designed for 1 ~ 12 pcs servo motors, high performance and high reliability with 6, 12 14 signal circuits, can combine with pneumatic/hydraulic rotary unions, other switch signals/ power channels, CanBus and Profibus. A servo encoder slip ring is an electrical slip ring that works for servo encoder signal and servo motor power supply. The servo encoder slip ring can save many cables and installation works to transmit data and power. Suitable for all kinds of servo/stepper motors. Supplies usually use gold contacts to avoid external interference and internal interference.

details

JSR-TB012 Series Industrial Bus-CAN Bus Slip Rings

Because slip rings are widely used in the factory, and there are so many different products available on the market, choosing the right one for us is a big problem. Today, let’s talk about Series Industrial Bus-CAN Bus Slip Rings .

details

JSR-FS038 Series Stator Flange Slip Ring

Series Stator Flange Slip Ring is a high efficient and reliable electrical device, which is the best solution for transferring signals and power between stationary and rotating parts. It is applicable to areas such as petroleum, chemical industry, marine, pumps, engines, wind and water power etc.

details

JSR-FR038 Series Rotor Flange Slip Ring

we specialize in the R & D, production and sales of rotary slip ring and contactor. Our products are widely used in electricity, petroleum, petrochemicals, metallurgy, chemical industry, aviation, medical treatment, automation industry, water conservancy and other industries. We have established long-term business relationships with many well-known enterprises. We welcome new and old customers to visit us.

details

JSR-FR025B Series Rotor Flange Slip Ring

A series rotor flange slip ring is a special kind of rotating electrical machine that is used to transfer electrical power between two machines. The rotor flange slip ring is a special type of rotary electrical machine that is used to transfer electrical power from one machine to another. This can be done in both directions.

details

JSR-FR025 Series Rotor Flange Slip Ring

Rotor Flange Slip Ring (RFSR) is a kind of electrical rotary connector that is mounted on the flange of the rotor. It is used in the high-voltage electric power station, and mainly in large electric power rotary converters such as large-scale wind turbines, hydroelectric plants, etc.

details

JSR-FR012 Series Rotor Flange Slip Ring

Rotor Flange Slip Ring, also named rotor electrical slip ring, is also named electrical slip ring. The slip ring is composed of rotor flange and stator flange, one on the stator side, another on the rotor side. Therefore, it is also called rotary electrical slip ring or rotary electrical bearing.

details

JSR-TH0335 Series Through Hole Slip Rings

Slip rings are devices that allow for the transfer of electricity or data between two rotating objects. Series through hole slip rings are essential for industry applications because they provide a more reliable connection than other types of slip rings.

details

JSR-TH0735 Series Through Hole Slip Rings

Slip rings are devices that allow for the transmission of power and data signals from a stationary to a rotating object. They are commonly used in a variety of applications, including wind turbines, robotics, and military vehicles. While slip rings can be used for a variety of purposes, they are particularly well-suited for applications where space is limited or where high speeds are required.

details

JSR-BC025 High Current Slip Ring

A slip ring is an electrical device that allows the passage of energy through a spinning or rotating object. The device consists of a set of rings that are mounted on a shaft or rotating platform. The rings are connected to each other by means of a conductor, and the energy passes through the conductor from one ring to the next.

details

JSR-HS012 Series High Speed Slip Ring

A slip ring is an electrical device that is used to connect a rotating device to an external power source. They are often used in heavy machinery, where a high current is required to power the machine.

details

Why choose JARCH for high quality and durable cond

Choose JARCH slip ring, synonymous with durability, 16 years of strength accumulation, 2 years warranty

01

One-stop service, quick delivery

Free technical solutions, 8 hours of fast drawing

JARCH Electromechanical only needs customers to provide your requirements for a series of products such as conductive slip rings, electric pneumatic slip rings, optical fiber slip rings, hydraulic rotary joints, capsule slip rings, etc., you can enjoy dozens of technologies and provide technical solutions for free 24 hours a day , 8 hours of drawing, 7 days of proofing, one-stop service for domestic delivery to your door. Conductive slip ring manufacturers choose JARCH, and enjoy the success without worry!
Free technical solutions, 8 hours of fast drawing
02

Rich experience

You lift slip ring demands, I will give you solutions

A series of products such as conductive slip rings, electric pneumatic slip rings, optical fiber slip rings, rotary joints developed and produced by JARCH Electromechanical Institute are widely used in aerospace, marine diving, military equipment, wind power generation, industrial automation, etc. high-tech field. For a long time, we have provided customized services for conductive slip rings for as many as 30+ Fortune 500 companies in the world, such as Huawei, Foxconn, BYD, and Siemens.
You lift slip ring demands, I will give you solutions
03

Durable slip ring, quality assurance

Find the JARCH brand slip ring, synonymous with durability, 2 years warranty, quality trust

The materials used for a series of products such as conductive slip rings and rotary joints developed and produced by JARCH Electromechanical Institute are very particular. The internal contact material of the product is gold-plated, the outer shell is precision machined from aviation aluminum alloy, the surface is anodized, and the rotating part is borne by imported NSK bearings. Unconditional 2-year warranty service is provided. The products are exported to more than 100 countries in the world. It has established long-term cooperative relations with more than 1,000 foreign companies.
Find the JARCH brand slip ring, synonymous with durability, 2 years warranty, quality trust
04

Durable slip ring, strong strength

A national high-tech enterprise, a big brand in the industry for 16 years, Find the JARCH brand for conductive slip ring.

Professional R&D and production of a series of precision and durable slip rings such as conductive slip rings, electric pneumatic slip rings, optical fiber slip rings, rotary joints, etc. for 16 years National High-tech Enterprise", and has passed the "ISO900" quality system certification for many years, and obtained CE, FCC and other international certifications.
A national high-tech enterprise, a big brand in the industry for 16 years, Find the JARCH brand for conductive slip ring.
Amusement Equipment
Mobile power supply
slip ring for construction machinery
Medical Equipment
New Energy
Automation Equipment
military equipment
steel industry

Free program acquisition

Oil and gas pc***@ariens.com Receive design 3min
equipment yom**@yahoo.com Receive design 10min
automation smr**@emirates.net.ae Receive design 15min
Wind power mel*@hotmail.com Receive design 20min
Aerospace dol**@aitlbd.net Receive design 25min
radar dme**@vsnl.net Receive design 30min
Heavy equipment sam**@yahoo.com Receive design 35min
medicine gu*@singerindialtd.com Receive design 40min
indexForm-bf

Slip ring customization

Meet demand

  • customized

    customized

  • parameter

    parameter

  • power

    power

  • blend

    blend

indexForm02

Slip ring professional information

Slipring professional information

What should I do if the signal transmission of the conductive slip ring is unstable?

We all know that conductive slip rings are electrical products that can rotate and transmit various media. We have also encountered many problems when using conductive slip rings. One is that the signal transmitted by the conductive slip ring is always unstable, etc. In fact, these problems are small problems we encountered when using the conductive slip ring. Today, the editor of Jiachi conductive slip ring will tell you about the conductive slip ring. What should I do if the transmitted signal is unstable and is always disturbed.

2022-05-31

New HD High Frequency Video Combination Slip Ring Solution!!!Why does High-end Equipment Use Fiber Optic Slip Rings Instead of Standard Slip Rings? How Wide the Application Range of Mercury Slip Rings,Do You Know it?

Fiber Optic slip ring is also called Fiber-Electric slip ring, Fiber Optic Rotary Joint. Adopt fiber to transmit signal, used to any devices to transmit electricity and Fiber signal when 360° rotating, such as HD video transmission system, microwave communication, medical equipment, sensor signal measurement, radar, and video monitoring system, etc. Especially suitable for some applications which require keeping continuous or intermittent rotating and transmitting mass data from the static side to the rotation side, which can improve mechanical performance, simplify system operation, and avoid damage to fiber when rotating. Can be combined with the traditional electric slip ring to transmit power and high-speed data.

2022-12-07

Message prompts

Close