At the beginning of March this year, JARCH conductive slip ring was commissioned by a domestic welding robot company to provide a new type of welding robot with a conductive slip ring with high current through the shaft. The technology of Jiachi conductive slip ring was designed according to the needs of customers. The conductive slip ring that matches the welding robot, this conductive slip ring has been verified on the customer's new welding robot.
Welding robots are industrial robots that perform welding (including cutting and spraying). According to the definition of a standard welding robot by the International Organization for Standardization (ISO), an industrial robot is a multi-purpose, reprogrammable automatic control manipulator (Manipulator) with three or more programmable axes for field of industrial automation. In order to adapt to different uses, the mechanical interface of the last axis of the robot is usually a connecting flange, which can be connected to different tools or end effectors. The welding robot is to install welding tongs or welding (cutting) guns on the end flange of the industrial robot, so that it can be welded, cut or thermally sprayed.
This conductive slip ring adopts a shaft-mounted inner hole of 40 mm, and the outer diameter is controlled within 100 according to the customer's requirements. This slip ring needs to meet the needs of the customer's new welding robot. The design scheme of the main shaft conduction is adopted. The so-called main shaft The conduction scheme is to use the entire rotor rotating shaft of the conductive slip ring as an input end of the conductive slip ring, and the entire main shaft has conductivity. This design can better meet the needs of customer equipment, and at the same time, it can meet the needs of customers for high current products. need.
This article comes from: http://jiachijidian.cn7.iswweb.cn/ JARCH conductive slip ring Please indicate the source