JSR-MCS006 Series Miniature Capsule Slip Rings
Professional slip ring manufacturer
Global HotlineInfo@szjarch.cn +86137-1425-1726
JARCH MCS006 series super cap slip ring, slip ring diameter 6.5 mm, optional 1~12 channels. Its small structure design can meet the needs of space size, strong stability, easy installation, without flange, both ends can be connected directly, the slip ring contact point is made of gold-gold material, to ensure very low resistance fluctuation and long working life; It is used in precision instruments, electronic gimbal stabilizers, UAVs and other devices requiring 360° stable continuous or intermittent rotation.
download：instructions 3D model
Product Grade Gode
20 million revolutions
60 million revolutions
Gold plating - gold plating
150 million revolutions
|Electrical Specification Parameters|
|Electrical Parameters||Signal Parameters|
|Rated Voltage||0-220VAC/VDC||Rated Voltage||0-220VAC/VDC|
|insulation resistance||≥300MΩ/300VDC||insulation resistance||≥300MΩ/300VDC|
|Wire specifications||AWG16#Galvanized Teflon||Wire specifications||AWG22Galvanized Teflon|
|Rated Current||Current for each circuit is optional|
|Dynamic resistance change||＜0.01Ω|
|Mechanical technical parameters|
|Mechanical Parameters||Environment Parameters|
|Working Life||＞5000000 turns||Working Temperature||-30C°-80C°|
|Rated Voltage||300MRP（Can be customized）||Working Humidity||0-85%RH|
|Contact Material||Precious Material(Can be customized）||Mechanical Vibration||MIL-SID-810E|
|Shell Material||ABS plastic (optional metal housing)||Protect Grade||IP51(Options:IP65、IP68)|
Conventional product selection table
JSR-MCS006 Series capsule slip ring partial specification selection table
|Ring No.||Color||Ring No.||Color|
|(Note: 12 colors are a group, with serial numbers 1...12, the next group repeats the first 12 colors, and each group is identified by a number tube as the group serial number.)|
Note: The following special requirements can be customized, the delivery time will increase by 3~15 days, and the cost will increase by 5%~50%. Most of the basic accessories of our company are standardized and modularized, and non-standard customization can also greatly reduce price and delivery.
The outgoing method and outgoing length of the rotor and stator can be customized.
Due to structural limitations, it can be customized according to the specified length or height, or outer diameter.
It can support up to 200 channels of power current or signal.
Optional aviation plug, terminal, and heat shrink tube.
Yaskawa, Panasonic, Siemens, and other servo system signal, power line, and encoder line hybrid slip ring.
Can mix high-speed data transmission (including Ethernet, USB, Profibus, ProfiNET, EtherCAT, CANopen, CANBUS, CC-LINK, RS232, RS485, and other industrial buses).
The temperature control signal and thermocouple signal are mixed.
Customized slip ring for special environments such as shockproof and high temperature.
It can be mixed with pneumatic and hydraulic rotary joints to form a gas-electric-hydraulic slip ring.
The low/high frequency and connector types can be customized.
The High-frequency power can be customized.
The number of channels can be customized according to requirements.
The maximum current can reach 5000 amperes (A).
Waterproof, underwater mode optional, IP65, IP68 optional.
Requirements for stainless steel housing.
No man aircraft referred to as an "unmanned aerial vehicle" (" UAV "), is the use of radio remote control equipment and its own program control device to operate the unmanned aircraft. In fact, unmanned aerial vehicle (UAV) is a general term for unmanned aerial vehicles (UAVs). From a technical point of view, it can be divided into unmanned fixed-wing aircraft, unmanned vertical take-off and landing aircraft, unmanned airships, unmanned helicopters, unmanned multi-rotor aircraft, unmanned umbrella aircraft, and so on. At present, all UAVs are equipped with the function of 360 non-dead Angle shooting. The cap slip ring is the core component connecting the UAV camera and the control motherboard. Therefore, the cap slip ring is an essential component of all UAVs and has been developed rapidly.
A high-speed ball camera is a kind of intelligent camera front end, full name is intelligent high-speed ball camera, short for the high-speed ball. The high-speed ball is the most complex camera front end with the best comprehensive performance in the monitoring system. It is complicated to manufacture and expensive and can adapt to the high-density and most complex monitoring occasions. High-speed ball machine to keep rotating to meet the responsibility of monitoring the overall, in order to avoid winding problems in the process of rotation, all high-speed ball machines will be equipped with cap type conductive slip ring, Jiachi conductive slip ring for many manufacturers of high-speed ball machine custom cap type conductive slip ring.
Fishing is a way of catching fish. The main fishing tools are fishing rods and bait. The fishing rod is usually made of bamboo or plastic, which is light and powerful. The rod and the bait are connected with a silk thread. Fishing has now become a pastime for many people. Fishing on fishing gear requirements are very high, it is good technology no good fishing gear can not catch the big fish, the current market visual fish aim is very popular in the world, the miniature cap slip ring is visible fish aim can do to see the key parts of the water.
Fiber Optic slip ring is also called Fiber-Electric slip ring, Fiber Optic Rotary Joint. Adopt fiber to transmit signal, used to any devices to transmit electricity and Fiber signal when 360° rotating, such as HD video transmission system, microwave communication, medical equipment, sensor signal measurement, radar, and video monitoring system, etc. Especially suitable for some applications which require keeping continuous or intermittent rotating and transmitting mass data from the static side to the rotation side, which can improve mechanical performance, simplify system operation, and avoid damage to fiber when rotating. Can be combined with the traditional electric slip ring to transmit power and high-speed data.
The wire precious metal brush improves the shortcomings of the composite metal brush, with small wear debris, small size, and good signal transmission stability, but the bearing capacity is very limited. Fiber brushes are designed with multiple metal fibers, which maintain multiple points of contact with the metal ring body, and have excellent electrical conductivity and high current density.
The conductive slip ring is an important electrical component responsible for connecting and transmitting energy and signals for the rotating body. It is usually installed in the center of rotation of the equipment and consists of two parts: the rotor and the stator. The conductive slip ring is used as the connecting part of the rotating part, if it is not selected properly, it will cause the equipment to fail to operate normally or damage the equipment due to operational obstacles, and may even cause an accident.
The conductive slip ring is used to conduct electricity between two relatively rotating equipment, which can effectively prevent the problem of twisting and winding during the rotation of the equipment. However, with the development of industrial technology, more and more places need to use slip rings, and the requirements for slip rings are getting higher and higher, not only requiring the slip rings to transmit power signals, but also to transmit other media: compressed air, Hydrogen, nitrogen, chemical mixed gas, steam, cooling water, hot water, hot oil, petroleum, sulfuric acid, beverages.