Professional slip ring manufacturer

Jarch Inc.-mall

Global Hotline

Info@szjarch.cn +86137-1425-1726
JSR-RAH38 Series Through Bore Multi Channel Pneumatic Slip Ring
JSR-RAH38 Series Through Bore Multi Channel Pneumatic Slip Ring
JSR-RAH38 Series Through Bore Multi Channel Pneumatic Slip Ring
JSR-RAH38 Series Through Bore Multi Channel Pneumatic Slip Ring
video

JSR-RAH38 Series Through Bore Multi Channel Pneumatic Slip Ring

JSR-RAH038 series via gas-electric slip ring is an inner hole 38 mm swivel gas-electric wear shaft installation is adopted, this gas power slip ring support compressed air, vacuum, hydrogen, nitrogen, chemical mixed gas, steam and other transmission of gas medium, as well as transmission of 0-1000 - a variety of specifications of the current transmission, more can transmit at the same time, the network, Industrial bus, HD signal line and other control signal transmission. This SERIES OF slip RINGS are WIDELY USED in industrial machine centers, rotary tables, heavy equipment towers, cable reels, packaging equipment, magnetic clutches, process control equipment, rotary sensors, emergency lighting equipment, robotics, exhibition/display equipment.

ID:38mm Connector Size:M5-G1/2 Optional Air Tube Size:4-14mm Optional Hybrid Circuits:1-128 Circuits

download:

instructions 3D model

Model Ordering Instructions

型号定购说明

JSR-RAH038-0201-0610-6S-TY.jpg

Product Grade Select Sheet

SELECTION

Product Grade

Max Speed

Working Life

Contact Materail

TY(General Grade)

250RPM

20000000turns

Precious Material

GY(Industrila Grade)

600RPM

60000000turns

Gold Plate-Gold Plate

JG(Military Grade)

1000RPM

150000000turns

Gold Alloy

Technical Specification Parameters

PARAMETER

Electrical Specification Parameters
Electrical ParametersSignal Parameters

specification

valuespecificationvalue
Rated Voltage0-380VAC/VDCRated Voltage0-380VAC/VDC
insulation resistance≥1000MΩ/500VDCinsulation resistance≥500MΩ/500VDC
Wire specificationsAWG16#Galvanized teflonWire specificationsAWG22Galvanized teflon
Rated CurrentCurrrent for each circuit is optional
Electric Noise10mΩ@6VDC,50mA,5Rpm
Dynamic resistance change<0.01Ω
Mechanical technical parameters
Mechanical ParametersEnviroment Parameters
specificationvaluespecificationValue
Working Life>50000000 turnsWorking Temperature-30C°-80C°
Rated Voltage300MRP(Optional)Working Humidity0-85%RH
Contact MaterialPrecious Material(Optional)Mechanical VibrationMIL-SID-810E 
Shell MaterialAluminium alloy (anodized)Protect GradeIP51(Options:IP65、IP68)
Rotational Torque0.1N.M;+0.03N.M/Circuit

DRAWING

The following drawings are only part of the drawings, if you need drawings of other models and specifications, please contact the online customer service

图片

JSR-RAH038-0100-4P05

Standard Products Selection Sheet

SELECTION

Standard Products Selection Sheet

JSR-RAH038 Series Through Bore Pneumatic Slip Ring Selection Sheet

Style NO.

Gas Channel

Connect or  Size

Adjustable Air Tube

10A

Signal(5A)

RAH038-XXXX-6P10

0-12可选

M5、G1/8"、G1/4"、G3/8"、G1/2"可选

4MM、6MM、8MM、10MM、12MM、14MM可选

6

0

RAH038-XXXX-6S

0-12可选

M5、G1/8"、G1/4"、G3/8"、G1/2"可选

4MM、6MM、8MM、10MM、12MM、14MM可选

0

6

RAH038-XXXX-12P10

0-12可选

M5、G1/8"、G1/4"、G3/8"、G1/2"可选

4MM、6MM、8MM、10MM、12MM、14MM可选

12

0

RAH038-XXXX-6P10-6S

0-12可选

M5、G1/8"、G1/4"、G3/8"、G1/2"可选

4MM、6MM、8MM、10MM、12MM、14MM可选

6

6

RAH038-XXXX-12S

0-12可选

M5、G1/8"、G1/4"、G3/8"、G1/2"可选

4MM、6MM、8MM、10MM、12MM、14MM可选

0

12

RAH038-XXXX-18P10

0-12可选

M5、G1/8"、G1/4"、G3/8"、G1/2"可选

4MM、6MM、8MM、10MM、12MM、14MM可选

18

0

RAH038-XXXX-6P10-12S

0-12可选

M5、G1/8"、G1/4"、G3/8"、G1/2"可选

4MM、6MM、8MM、10MM、12MM、14MM可选

6

12

RAH038-XXXX-12P10-6S

0-12可选

M5、G1/8"、G1/4"、G3/8"、G1/2"可选

4MM、6MM、8MM、10MM、12MM、14MM可选

12

6

RAH038-XXXX-18S

0-12可选

M5、G1/8"、G1/4"、G3/8"、G1/2"可选

4MM、6MM、8MM、10MM、12MM、14MM可选

0

18

RAH038-XXXX-24S

0-12可选

M5、G1/8"、G1/4"、G3/8"、G1/2"可选

4MM、6MM、8MM、10MM、12MM、14MM可选

0

24

RAH038-XXXX-6P10-18S

0-12可选

M5、G1/8"、G1/4"、G3/8"、G1/2"可选

4MM、6MM、8MM、10MM、12MM、14MM可选

6

18

RAH038-XXXX-30S

0-12可选

M5、G1/8"、G1/4"、G3/8"、G1/2"可选

4MM、6MM、8MM、10MM、12MM、14MM可选

0

30

RAH038-XXXX-36S

0-12可选

M5、G1/8"、G1/4"、G3/8"、G1/2"可选

4MM、6MM、8MM、10MM、12MM、14MM可选

0

36

Note: Many 5A current rings together can be used as 1 channel N*5A current ring; For example: 2 ring 5A and up as 1 channel 10A use. The above models are part of this specification.

 If you need other specifications, please contact us directly。

Wire Color for Each Circuit



COLOR CODE SHEET

CircuitColorCircuitColor
1black7purple
2red8grey
3yellow9orange
4green10brown
5blue11pure
6white12light green
(Note: 12 colors are a group, serial number 1...12, the next group repeat the first 12 colors, each group with number tube as the group number identification.)

OPTIONAL

Note: the following special requirements can be customized, the delivery time will increase by 3-15 days, the cost will increase by 5%-50%, Most basic parts are standard and module in our company,This can also greatly reduce the cost and delivery time of customized slip ring.

① The outlet mode and outlet length of rotor and stator can be customized.

② Due to the limitation of the structure, it can be customized according to the specified length or height or outer diameter.

③ The maximum power current or signal of 200 channels can be supported.

④ Optional aviation plug, terminal and heat shrinkable tube.

⑤ Yakawa, Panasonic, Siemens and other servo system signal, power line and encoder line hybrid slip ring.

⑥ High speed data transmission can be mixed(including Ethernet,USB, PROFIBUS, PROFINET, EtherCAT, CANOPEN, CANBUS, CC-LINK, RS232, RS485 and other industrial buses).

⑦ Temperature control signal, thermocouple signal mixing.

⑧ Shockproof, high temperature and other special environment customization.

⑨ It can be mixed with pneumatic and hydraulic rotary joint as an electric pneumatic hydraulic slip ring.

⑩ High frequency and low frequency can be customized, joint type can be customized.

⑪ High frequency power can be customized

⑫ The number of channels can be customized

⑬ The maximum current is 5000 amperes (A).

⑭ Military industrial class.

⑮ Navigation, optional underwater mode, IP65,IP68 optional.

⑯ Stainless steel housing requirements.



RANGE

Non-standard automation equipment definition


Non-standard automation equipment definition is the user customized, the user's only, non-market circulation of automation system integration equipment, is adopted in accordance with the national issued unified industry standards and specifications manufactured unit equipment assembly, is according to the customer's use needs, design and manufacture of equipment. At present, most of the equipment is inseparable from the requirements of gas and electricity, so the gas and electric slip ring was born in response to the needs of the industry. The gas and electric slip ring is the core component that can ensure the equipment to transmit gas, current, signal and other media while rotating 360 degrees. The gas-electric slip rings produced by JARCH Electromechanical are widely used in non-standard automation equipment, and have been recognized by many equipment manufacturers and customers.

非标自动化设备


Gas-electric rotating platform

Gas-electric rotating platform is adopted by many automation equipment, which greatly reduces the volume of equipment and reduces the cost of equipment. The reason why the gas-electric rotating table can do various actions while constantly rotating is because of the support of the gas-electric sliding ring. The gas-electric sliding ring can ensure that the equipment can transmit various control signals and the pressure needed when the table rotates without interruption. JARCH Mechanical and electrical professional R & D and production of gas-electric slip rings for 13 years, the company produced gas-electric slip rings sold to more than 100 countries overseas, and so on to many new and old customers recognized, Jiachi mechanical and electrical welcome new and old customers to visit the factory guidance.

旋转工作台

Automatic production line


Automatic production line is a kind of production organization in which the product process is realized by automatic machine system. It is formed on the basis of the further development of continuous assembly line. The modern automated production line is the peak of the era of gas and electricity. Automatic production line of development will promote the development of conductive slip ring industry at the same time, the equipment should be the need of gas slip ring, electro-hydraulic slip ring, photoelectric slip ring and so on a series of mixed slip ring arises at the historic moment, especially gas electrical slip ring has become the indispensable parts in the automatic production line, gas-electric slip ring can solve the problem of equipment on the job is to produce winding, Greatly improve the work efficiency of the production line, avoid the production line will be due to equipment winding may stop production.

自动化产线


Message consultation

Product

JSR-RAH38 Series Through Bore Multi Channel Pneumatic Slip Ring

name
tel
email

Message prompts

Close