Professional slip ring manufacturer

Jarch Inc.-mall

Global Hotline

Info@szjarch.cn +86137-1425-1726
JSR-TH1235 Series Through Hole Slip Rings
JSR-TH1235 Series Through Hole Slip Rings
JSR-TH1235 Series Through Hole Slip Rings
JSR-TH1235 Series Through Hole Slip Rings
video

JSR-TH1235 Series Through Hole Slip Rings

JSR-TH1235 series through hole slip ring, perforated diameter 12mm(applicable to OD 35mm, number of channels: 1-12, aluminum alloy structure of the whole precision conductive slip ring. Support Signal (2A) or, or 10A, 15A supply current, voltage 380VAC/24VDC, the working voltage can be customized up to 1000V; The protection level can be customized to IP65/IP68.

ID:12mm OD:35mm Circuit:1-12 Circuits Voltage:24V~220V

download:

instructions 3D model

Model Ordering Instructions

型号定购说明

JSR-TH1235-6S-TY.jpg

Product Grade Selection Table

SELECTION

Product Grade Gode   

MAX. Speed 

Working Life

Contact Material    

TY(General Grade

250RPM

20 million revolutions      

Precious Metal

GY(Industrial Grade)

600RPM

60 million revolutions      

Gold plating - gold plating 

JG(Military Grade)

1000RPM

150 million revolutions      

Golden alloy

Technical Specifications

PARAMETER

Electrical Technical Parameters

Power

Signal

Spec.

Data

Spec.

Data

Voltage range

0-380VAC/VDC

Voltage range

0-380VAC/VDC

Insulation Resistance

≥1000MΩ/500VDC

Insulation Resistance

≥1000MΩ/500VDC

Lead wire spec.

AWG16# Tinned Teflon

Lead wire spec.

AWG22# Tinned Teflon

Rated current

Optional current for each channel

Electrical noise

10mΩ@6VDC,50mA,5Rpm

Dynamic resistance change

<0.01Ω

Mechanical Data

Mechanical Performance

Environmental Performance

Spec.

Data

Spec.

Data

Working Life

> 50 million revolutions  (depends on working conditions)

Operating Temperature

-30C°-80C°

Rated Speed

300MRP(can be customized )

Working Humidity

0-85%RH

Contact Material

Precious Metal (can be customized )

Mechanical Vibration

MIL-SID-810E

Shell Material

Aluminum Alloy (surface hard oxidation treatment)

IP Grade

IP51( IP65、IP68 Optional)

Rotational Torque

0.1N.M;+0.03N.M/ channel

DRAWING

标准图纸

*If no standard models are suitable, contact us for custom solutions directly, thanks


image

Standard Products Selection Sheet

常规产品选型表

JSR-TH1235-XX Series Through Hole Slip Rings Table
型号Power Circuits (10A)Signal Circuits(2A)Length(L/MM)
JSR-TH1235-2S0225.6
JSR-TH1235-4S0425.6
JSR-TH1235-6S0625.6
JSR-TH1235-8S0837.1
JSR-TH1235-12S01237.1

Note: N pieces of  5A current loops can be used as 1 channel of N*5A current loop;  For example, 2 rings 5A can be used as 1 circuit 10A.*If no standard models are suitable, contact us for custom solutions directly, thanks.

Color Code of Lead Wires

各环路导线色码表

Ring No.ColorRing No.Color
1Black7Purple
2Red8Grey
3Yellow9Orange
4Green10Brown
5Blue11Transparent
6White
12Light Green
(Note: 12 colors are a group, with serial numbers 1...12, the next group repeats the first 12 colors, and each group is identified by a number tube as the group serial number.)

INSTALLATION

 安装方式



image


OPTIONAL


Note: The following special requirements can be customized, the delivery time will increase by 3~15 days, and the cost will increase by 5%~50%. Most of the basic accessories of our company are standardized and modularized, and non-standard customization can also greatly reduce price and delivery.

  1. The outgoing method and outgoing length of the rotor and stator can be customized.

  2. Due to structural limitations, it can be customized according to the specified length or height, or outer diameter.

  3. It can support up to 200 channels of power current or signal.

  4. Optional aviation plug, terminal, and heat shrink tube.

  5. Yaskawa, Panasonic, Siemens, and other servo system signal, power line, and encoder line hybrid slip ring.

  6. Can mix high-speed data transmission (including Ethernet, USB, Profibus, ProfiNET, EtherCAT, CANopen, CANBUS, CC-LINK, RS232, RS485, and other industrial buses).

  7. The temperature control signal and thermocouple signal are mixed.

  8. Customized slip ring for special environments such as shockproof and high temperature.

  9. It can be mixed with pneumatic and hydraulic rotary joints to form a gas-electric-hydraulic slip ring.

  10. The low/high frequency and connector types can be customized.

  11. The High-frequency power can be customized.

  12. The number of channels can be customized according to requirements.

  13. The maximum current can reach 5000 amperes (A).

  14. Military level.

  15. Waterproof, underwater mode optional, IP65, IP68 optional.

  16. Requirements for stainless steel housing.



Applied Projects

适用项目

Drilling Platform

Drilling platforms are offshore structures primarily used for drilling wells. The platform is equipped with drilling, power, communication, navigation and other equipment, as well as safety life-saving and personnel living facilities, which is an indispensable means for offshore oil and gas exploration and development. The normal operation of the drilling platform is inseparable from the credit of the conductive slip ring. Many rotating parts on the drilling platform need to use the conductive slip ring. The conductive slip ring can smoothly and uninterruptedly transmit all parts of the drilling platform during the rotation process. The current and various signals are required to ensure the normal operation of each part of the drilling platform.

钻井平台


Blow Molding Machine

The bottle blowing machine refers to the machine that blows the bottle. The most simple explanation is the machine that can blow plastic particles (soften into liquid) or finished preforms into bottles through certain technological means. The bottle blowing machine is convenient and fast, and has a large amount of molding. After its appearance, it replaced most of the manual blowing machines and was adopted by most beverage companies. The more common models include a one-time molding hollow extrusion blow molding machine using PP and PE, an injection stretch blow molding machine using PET, PC or PP twice molding, and the newly developed multi-layer hollow extrusion blow molding and stretch blow molding machine. stretch blow molding.

gtht


Filling Machine

Filling machines are mainly a small category of products in packaging machines. From the perspective of packaging materials, they can be divided into liquid filling machines, paste filling machines, powder filling machines, and granule filling machines; from the degree of automation of production It is divided into semi-automatic filling machines and fully automatic filling production lines. In addition, in recent years, the level of science and technology has improved, and the domestic filling machine industry has also developed rapidly, with technical level, equipment performance, quality and other aspects. It has greatly improved and played an important role in supporting the efficient and safe production of enterprises.

image


游乐设备


Message consultation

Product

JSR-TH1235 Series Through Hole Slip Rings

name
tel
email

Message prompts

Close