Professional slip ring manufacturer

Jarch Inc.-mall

Global Hotline

Info@szjarch.cn +86137-1425-1726
JARCH's large-aperture conductive slip ring is once again applied to the carousel

JARCH's large-aperture conductive slip ring is once again applied to the carousel

source:Headlines 2022-06-10 14:28:06 large hollow slip ring 303

Carousel is a necessary amusement equipment in many amusement parks. On November 17, 2021, the large aperture conductive slip ring customized by Jiachi Electromechanical for a carousel in an amusement park was delivered smoothly. The inner diameter of this large aperture conductive slip ring is 400mm, the outer diameter is 650mm, using 304 stainless steel as the shell, high quality aluminum alloy as the spindle, can simultaneously transmit 4 channels of 30A large current, 30 channels of control signals, can ensure the carousel in uninterrupted rotation at the same time transmission current and control signals, so as to ensure the normal operation of the carousel.

src=http___photo.travelking.com.tw_news_3748_e_1&refer=http___photo.travelking.com.jpg

  

Jia chi machinery research and development production of large aperture conductive slip ring not only can be used on a carousel, you can also use the ferris wheel, rotating speed, rotating chair and so on a series of amusement facilities, jia chi machinery research and development production of large aperture conductive slip ring its maximum current of up to 1000 every road, a product diameter can be within 5 meters, can support the combination of current signal transmission.

The picture

Large diameter slip ring specifications:

Number of routes: 1 to 12

Inner diameter: within 5 meters

Speed: 50 RPM

Operating temperature: -40℃~ +80℃

Operating temperature: 60%RH or higher

Rated voltage :380/VAC 240VAC/DC

Rated current: 40A for power supply, 3A for signal

Compressive strength: each road ≥500V@50Hz

Insulation resistance: 500mω@500VDC

Electrical noise: ≤ 8Mω


Message prompts

Close