Professional slip ring manufacturer
Global HotlineInfo@szjarch.cn +86137-1425-1726
All conductive slip rings are composed of: shell, bearing, brush wire, brush holder, copper ring, main shaft, end cover, spacer, and wires. Among them, the material of brush wire and copper ring directly affects its service life and current continuity, the material of shell directly affects its corrosion resistance energy, and the quality of bearing directly affects the rotation speed and continuity of the slip ring.
The JSR-FS028B-2P50 conductive slip ring developed and produced by Jiachi for customers is a kind of conductive slip ring installed by stator flange. The shell is made of aluminum alloy anodized, which can effectively prevent the erosion of external environment. The internal process of precious metal plating can ensure the normal transmission of current. It can be used normally in rainy outdoor environment.
After the photoelectric slip ring, a matching optical fiber retractor was installed immediately. After repeated retracting and laying out by the customer, and after various tests, the photoelectric slip ring was successfully signed by the customer. Photoelectric slip ring is called photoelectric rotary joint, which is a conductive slip ring that can simultaneously transmit optical fiber signal, current, control signal and even gas and liquid.
The capsule conductive slip rings produced by Jiachi Electromechanical are widely used in a series of industries such as rotating light boxes, rotating monitoring, and anchor fish equipment. Because of their rotating and conducting characteristics, many customers have solved the problem of equipment rotating and winding.
This conductive slip ring has been widely used in various industries and fields. After time-tested, it fully shows that the various performance parameters of this conductive slip ring are very reliable. It has been recognized by the majority of customers. The assembly of this conductive slip ring has gone out of the country because of its wide application, and has been exported to dozens of countries in the world, and has been recognized by customers all over the world.
Conventional cable winches come in two forms. One is the non-slip ring winch, the other is the end slide ring winch. The former can only be used to store cables, and cables still need to be removed or connected when retracting or releasing cables; The latter because of the use of end slip ring, and the use of ordinary brush, easy to cause brush contact is not close, causing phase loss, heating and other faults, can only be used in the requirements of low, low current occasions