JSR-CS030 capsule slip rings
Professional slip ring manufacturer
Global HotlineInfo@szjarch.cn +86137-1425-1726
The outer diameter of JSR-CS030 series cap type slip ring is 30mm, small in size and compact in structure. It is specially developed by JARCH Electromechanical for national defense, military, research and other non-civil fields. It adopts ultra-thick gold-plated treatment, imported bearings and rare metal alloy brush wire. The rotating end of the wire and the static end of the wire corresponding to the use of 24 color wire, more convenient for wiring operation. Conductive slip ring adopts 90 degree Angle V groove design, so that more contact surface, so that the rotation is more smooth, torque is lower and dynamic resistance is lower.
download：instructions 3D model
Gold Plate-Gold Plate
|Electrical Specifictaion Parameters|
|Electrical Parameters||Signal Parameters|
|Rated Voltage||0-220VAC/VDC||Rated Voltage||0-220VAC/VDC|
|insulation resistance||≥300MΩ/300VDC||insulation resistance||≥300MΩ/300VDC|
|Wire specifications||AWG16#Galvanized teflon||Wire specifications||AWG22Galvanized teflon|
|Rated Current||Currrent for each circuit is optional|
|Dynamic resistance change||＜0.01Ω|
|Mechanical technical parameters|
|Mechanical Parameters||Enviroment Parameters|
|Working Life||＞5000000 turns||Working Temperature||-30C°-80C°|
|Rated Voltage||300MRP（Can be customized）||Working Humidity||0-85%RH|
|Contact Material||Precious Material(Can be customized）||Mechanical Vibration||MIL-SID-810E|
|Shell Material||ABS plastic (optional metal housing)||Protect Grade||IP51(Options:IP65、IP68)|
Standard Products Selection Sheet
JSR-CS030 Series capsule slip ring partial specification selection table
Signal or 2A
|Note: N 5A current rings together can be used as 1 channel N*5A current ring; For example: 2 ring 5A and up as 1 channel 10A use. The above models are part of this specification. For other specifications, please contact +8613631617302 Nico|
COLOR CODE TABLE
|(Note: 12 colors are a group, serial number 1...12, the next group repeat the first 12 colors, each group with number tube as the group number identification.)|
Note: the following special requirements can be customized, the delivery time will increase by 3-15 days, the cost will increase by 5%-50%, Most basic parts are standard and module in our company,This can also greatly reduce the cost and delivery time of customized slip ring.
① The outlet mode and outlet length of rotor and stator can be customized.
② Due to the limitation of the structure, it can be customized according to the specified length or height or outer diameter.
③ The maximum power current or signal of 200 channels can be supported.
④ Optional aviation plug, terminal and heat shrinkable tube.
⑤ Yakawa, Panasonic, Siemens and other servo system signal, power line and encoder line hybrid slip ring.
⑥ High speed data transmission can be mixed(including Ethernet,USB, PROFIBUS, PROFINET, EtherCAT, CANOPEN, CANBUS, CC-LINK, RS232, RS485 and other industrial buses).
⑦ Temperature control signal, thermocouple signal mixing.
⑧ Shockproof, high temperature and other special environment customization.
⑨ It can be mixed with pneumatic and hydraulic rotary joint as an electric pneumatic hydraulic slip ring.
⑩ High frequency and low frequency can be customized, joint type can be customized.
⑪ High frequency power can be customized
⑫ The number of channels can be customized
⑬ The maximum current is 5000 amperes (A).
⑭ Military industrial class.
⑮ Navigation, optional underwater mode, IP65,IP68 optional.
⑯ Stainless steel housing requirements.
No man aircraft referred to as "unmanned aerial vehicle" (" UAV "), is the use of radio remote control equipment and its own program control device to operate the unmanned aircraft.In fact, unmanned aerial vehicle (UAV) is a general term for unmanned aerial vehicle (UAVs). From a technical point of view, it can be divided into: unmanned fixed wing aircraft, unmanned vertical take-off and landing aircraft, unmanned airship, unmanned helicopter, unmanned multi-rotor aircraft, unmanned umbrella aircraft and so on.At present, all UAVs are equipped with the function of 360 non-dead Angle shooting. The cap slip ring is the core component connecting the UAV camera and the control motherboard. Therefore, the cap slip ring is an essential component of all UAVs and has been developed rapidly.
High speed ball camera is a kind of intelligent camera front end, full name is intelligent high speed ball camera, short for high speed ball.High-speed ball is the most complex camera front end with the best comprehensive performance in the monitoring system. It is complicated in manufacture and expensive, and can adapt to the high-density and most complex monitoring occasions.High speed ball machine to keep rotating to meet the responsibility of monitoring the overall, in order to avoid winding problems in the process of rotation, all high speed ball machine will be equipped with cap type conductive slip ring, Jiachi conductive slip ring for many manufacturers of high speed ball machine custom cap type conductive slip ring.
Fishing is a way of catching fish.The main fishing tools are fishing rod, bait.The fishing rod is usually made of bamboo or plastic, which is light and powerful. The rod and the bait are connected with a silk thread.Fishing has now become a pastime for many people.Fishing on fishing gear requirements are very high, it is good technology no good fishing gear can not catch the big fish, the current market visual fish aim is very popular in the world, the miniature cap slip ring is visible fish aim can do to see the key parts of the water.
Fiber Optic slip ring is also called Fiber-Electric slip ring, Fiber Optic Rotary Joint. Adopt fiber to transmit signal, used to any devices to transmit electricity and Fiber signal when 360° rotating, such as HD video transmission system, microwave communication, medical equipment, sensor signal measurement, radar, and video monitoring system, etc. Especially suitable for some applications which require keeping continuous or intermittent rotating and transmitting mass data from the static side to the rotation side, which can improve mechanical performance, simplify system operation, and avoid damage to fiber when rotating. Can be combined with the traditional electric slip ring to transmit power and high-speed data.
The wire precious metal brush improves the shortcomings of the composite metal brush, with small wear debris, small size, and good signal transmission stability, but the bearing capacity is very limited. Fiber brushes are designed with multiple metal fibers, which maintain multiple points of contact with the metal ring body, and have excellent electrical conductivity and high current density.
The conductive slip ring is an important electrical component responsible for connecting and transmitting energy and signals for the rotating body. It is usually installed in the center of rotation of the equipment and consists of two parts: the rotor and the stator. The conductive slip ring is used as the connecting part of the rotating part, if it is not selected properly, it will cause the equipment to fail to operate normally or damage the equipment due to operational obstacles, and may even cause an accident.
The conductive slip ring is used to conduct electricity between two relatively rotating equipment, which can effectively prevent the problem of twisting and winding during the rotation of the equipment. However, with the development of industrial technology, more and more places need to use slip rings, and the requirements for slip rings are getting higher and higher, not only requiring the slip rings to transmit power signals, but also to transmit other media: compressed air, Hydrogen, nitrogen, chemical mixed gas, steam, cooling water, hot water, hot oil, petroleum, sulfuric acid, beverages.